Duty and day plans
A plan is a day of flying on one aircraft: up to 5 legs, one after the other, each from the airport where the last one lands. On an airliner it is a duty plan. On a general-aviation aircraft it is a day plan. A plan does not keep the aircraft for you. Other pilots can still lease it. To keep an aircraft, use a hold.
How to plan a day
- Open the planner. On the aircraft page, select Plan beside Hold, or select Plan when you lease. The aircraft must be at a known airport or in the air. If another pilot has a plan on it, your day starts where their plan ends. If another pilot is flying it now, select Plan from on their flight's page: your day starts at their destination after they land.
- Set the start time. Select a time from 15 minutes to 6 hours from now, or Pick a time. The first leg leaves at that time. A general-aviation day starts in 30 minutes by default, an airliner day in 45. On an airliner, select Real to fly each leg at its real-world time.
- Add the legs. Use Build or Auto (see below).
- Set the turns. The time between two legs starts at the aircraft's standard turn. Change it on each turn row. On an airliner, select Next flight at real time to wait for the next leg's real-world departure.
- Select Accept. The plan opens. Other pilots can see it on the aircraft page.
You can have one plan of your own at a time. A new plan replaces the last one.
Build and Auto
- Build: select each leg from the board of flights out of the last airport. Select the search icon on Flight or To to search the board. Select Departs or Distance to sort it. You can also type an airport in the ICAO field and select Add leg. If a flight on the board goes to that airport, the plan uses that flight.
- Auto: Tailstrike plans the day for you. Set Max time (the longest the day can be) and Legs. Auto keeps the day in one general direction, but a leg back to the first airport is always possible. Select Reroll to get a different day. Select Somewhere new to go to airports you have never flown to or from.
- Show filters the board. On an airliner: Real flights only, Operator only, and the aircraft family or type. On a general-aviation aircraft: Short, Medium or Long, measured on that aircraft's own range.
Free pilots and Supporters
- All pilots can plan days, fly them and share them, with Build or Auto, and Somewhere new. A free pilot's legs go to airports in range of the aircraft, with made-up callsigns: no real flights. In Build, free pilots type their own legs, or select Auto beside Add leg to add a random airport in range. If the airline does not fly from the airport where an airliner is, Auto's first leg goes to an airport the airline does fly from. For Supporters, the board lists those airports first and the rest of the day uses real flights. On a general-aviation aircraft, free pilots also get the board of airports in range.
- Supporters also get the real-world schedule on airliners (real flight numbers, times, gates and terminals) and Intelligent Dispatch on each leg. On a general-aviation aircraft, a Supporter's day also gets a day story (see below).
Callsigns
Each leg has a callsign. A leg that is not a real flight gets a made-up callsign for the operator. You can change it in the planner. A real flight keeps its real callsign. A general-aviation aircraft always flies under its registration.
VATSIM
Select VATSIM to prefer legs to VATSIM events and to airports with ATC online. It is on by default if you usually fly on VATSIM.
- A leg gets an Event mark when it arrives at an event airport during the event (from 1 hour before it starts), or departs from one during the event. Events up to 36 hours ahead count.
- A leg gets an ATC mark when a controller covers either airport now. This mark is only for legs that depart in the next 2 hours.
- Auto prefers marked legs. The board shows them first.
- The route map shows the VATSIM sectors that are online now.
Fly each leg
- When the next leg departs in 3 hours or less, and the aircraft is parked at that airport and free, the leg shows Fly now.
- Select Fly now to lease the aircraft. The lease gets the leg's destination and callsign. For a Supporter, Intelligent Dispatch writes the briefing. A real flight leg uses that real flight.
- When you land, the leg shows Complete. If you are late, the next legs show their new times.
- You get a notification 3 hours before your next leg, if you planned it more than 3 hours ahead.
Day stories (general aviation, Supporters)
When you accept a day plan on a general-aviation aircraft, Intelligent Dispatch writes the story of the day: one reason that connects all the legs, with a short line for each leg. Light aircraft mostly fly for their own sake or for everyday reasons. Larger aircraft mostly fly for work. Some days use a real, current event near the route.
- Each leg's Dispatch continues the day story, with the weather at that time.
- On a day with one leg, the day story is the Dispatch.
- You get up to 5 day stories each day (UTC). After that, a day plan has no story, and each leg gets a usual Dispatch.
Change or end a plan
- Edit: before you fly the first leg, select Edit on the plan to change the legs, then select Save changes.
- Finish here: end your plan early, at the airport where the aircraft is now. If you hold a lease on the aircraft, Tailstrike asks what to do with it.
- A plan ends by itself when the day goes a different way: for example, when the aircraft flies somewhere else, or a leg is not flown 3 hours after its time.
Handoff legs
If you finish early and another pilot planned after you, the aircraft is not where their plan starts. Tailstrike opens handoff legs from the aircraft's airport to the start of their plan. Any pilot can fly them. The waiting pilot sees them first and can add them to their own day.
- Handoff legs show a Leave by time. That is the latest departure that gets the next pilot out on time. You can take them until then.
- Select Fly it to take them.
- If nobody flies them, the next pilot gets a notification that the aircraft is somewhere else.
Where to see plans
- The aircraft page shows each plan on the aircraft, in the order that they fly, with Plan from at the end of the last one.
- The Duty plans filter in the registry shows aircraft with a plan, and where and when each plan ends.
- Your plans are in your activity.