Skip to Content
/docs

The Tailstrike plugin

The Tailstrike plugin is a small desktop application for Windows. It connects your simulator to the network. It is the most important part of Tailstrike. It records your flights, it sends your live panel, it records your landings, it loads your leased aircraft into the simulator, and it carries the state of an aircraft to the next pilot. Everything else, the fleet, the lease, the flight plan and the map, is on the web app.

How to install it

  1. Download the installer. Download TSPlugin-win-Setup.exe and run it. The plugin operates on Windows only. The installer is signed. Windows shows the publisher Drop Economics LLC, the company behind Tailstrike.
  2. Let it update itself. The plugin checks for a new version each time that it starts, and it installs the new version automatically. Therefore you install it one time only.
  3. Install one copy, for all simulators. One installation operates with all of your simulators. You do not install a different plugin for MSFS and for X-Plane.

How to connect it to your account

Until the plugin is connected to your account, it shows a banner: Not connected to your account. The plugin cannot track a flight before this step.

  1. Click CONNECT in the banner. The plugin opens a Tailstrike page in your browser. Sign in, if you are not signed in.
  2. Let the page send the token. The page sends a pairing token to the plugin on your computer. The token does not leave your computer. The page shows Connected when it is done. Then close the tab.
  3. Permit the hand-off, if your browser asks. Some browsers, for example Brave, do not permit a web page to speak to an application on your computer. Then the browser asks Open Tailstrike?. Click Open, and the plugin gets the token.

The plugin keeps the token. Therefore you connect one time only. If you want to do it by hand, open your settings on the web, copy the pairing token, and click Paste token in the plugin. You can make a new token, or cancel the token, at each moment. See Settings & integrations.

The window

The plugin is one window, with two pages: the flight page and the settings page.

The header

  • The number of pilots that fly on the network now.
  • Two badges: the simulator (NO SIM, or MSFS / X-Plane when connected) and the flight (NO FLIGHT, or the status of your flight). The second badge shows WAITING in amber for a few seconds after you connect. This is normal.
  • CONNECT links the plugin to your simulator. The plugin also connects itself ten seconds after it finds a simulator that runs. When you have no lease, this button is Lease an aircraft to start, and it opens the fleet on the web.

The flight page

  • MSFS / X-PLANE: choose the simulator for the load buttons.
  • Load Plane (MSFS), Load Sim & Aircraft (X-Plane) and Sync State: the pre-flight tools. See below. Each button has a tooltip that tells you what it does for your simulator and your aircraft.
  • The log: the result of each action, and each problem. For example Flight started: departed KCLT, Flight complete: KCLT → KEWR · landing −180 fpm, the values that Sync State set, and the result of a High Fidelity save. The full technical log is on the settings page.
  • Last landing: the touchdown rate and the G value of your last landing.
  • The last flight of the aircraft: the location, the status and the fuel that the last pilot left.
  • Pilot notes: the notes of the last pilot, and your notes for the next pilot.

The lease bar

  • The lease pill: your active lease, with the registration and the type, and the state level of the aircraft: None, Universal or High Fidelity. Click Open lease to open the lease page on the web. Without a lease, the bar shows NO LEASE.
  • CANCEL LEASE returns the aircraft before you fly.

The telemetry bar

  • The altitude, the speeds, the Mach number, the heading, the vertical speed and the transponder code, live from the simulator.
  • A green ↑ time when the last update reached Tailstrike. A red ✗ means that Tailstrike refused the update, usually because of the token.
  • Your Supporter badge, or a link to the Supporter page.
  • ⚙ opens the settings page.

The settings page

  • ACCOUNT: connect your account, or change the token.
  • ACCOUNT SETTINGS: opens your full settings on the web (profile, SimBrief, Navigraph, subscription).
  • WINDOW: Minimize to tray. When it is on, the default, the minimize button sends the plugin to the tray by the clock, and the plugin continues to record your flight there. Click the icon to open the plugin. Right-click the icon to connect or disconnect the simulator, open your lease, open the settings, or quit.
  • TRAFFIC: Show parked aircraft puts the Tailstrike aircraft parked near you into your simulator. The card shows the models that your simulator offers. Rescan models asks the simulator again. See Parked aircraft in your sim.
  • YOUR MD-11 SAVE: Restore my save puts your own TFDi Design MD-11 save back. See High Fidelity aircraft.
  • STATE DIAGNOSTICS: Open inspector shows each value that the plugin reads from the simulator and from Tailstrike, and each value that it writes, with its source.
  • X-PLANE AIRCRAFT FOR THIS LEASE: the aircraft and the livery that the plugin uses for the leased registration. Change asks you again.
  • DIAGNOSTIC LOG: everything that the plugin did. Copy log copies the full log for a bug report.

Lease on the web, fly with the plugin

You lease an aircraft, choose a mission or a dispatch assignment, plan the flight and look at the live map on the web app. The plugin reads your active lease from your account. It shows the lease in the lease bar as soon as you lease. See Leasing an aircraft.

What it records

  • Each flight, directly from the simulator, online or offline. You do not need to be a member of a network. The plugin sends your position each five seconds.
  • Your live panel: the altitude, the speed, the heading, the fuel, the flaps and the gear. These values appear in real time on your lease page and in your hangar. See Live flight data.
  • Your landing: the touchdown rate in feet each minute, and the maximum G value. The plugin reads the simulator ten times each second at the touchdown. See Landing rate & weather.
  • The aircraft state, on each flight: the fuel in each tank, the transponder code and mode, the COM, NAV and ADF frequencies, the altimeter setting and the autopilot targets. The plugin sends them on each update, not only at the shutdown. Therefore the state is correct also when you close the simulator on the ramp.
  • Your approach: the last part of each approach, ten times each second, to the touchdown. Your flight page rates the approach and shows it in 3D, with the weather and the light of the moment.

The aircraft parked around you

The plugin also puts the Tailstrike aircraft that are parked near you into your simulator, at their stands, in their liveries. This is on by default. On MSFS you install nothing more. On X-Plane 12 you need a CSL model set, for example Bluebell from xPilot. See Parked aircraft in your sim.

The flight-complete card

When the flight is complete, a card opens in the plugin. It shows the route, the summary and the landing. Write your pilot notes for the next pilot. Then click LEASE AGAIN to keep the aircraft for the next leg, or COMPLETE LEASE to return it. See Flight completion rules.

The state of the aircraft, in your cockpit

The shared world is continuous because the plugin puts the state of the last pilot into your cockpit. Tailstrike has two levels:

  • Universal: each aircraft, on each simulator. The fuel in each tank, the transponder, the radios, the altimeter and the autopilot targets.
  • High Fidelity: supported add-on aircraft. The full cockpit, and the wear and the failures of the aircraft. See High Fidelity aircraft.

Sync State writes the saved state into your aircraft, in one step. Use it on the ground, when the aircraft is stopped, for example when you loaded the flight from the menu of the simulator. The plugin connects to the simulator itself when you click it. A card shows the progress, Loading N123AB, then the result, N123AB loaded. The plugin reads each value back after a few seconds, and the log lists which values were set, and which values the aircraft did not accept. Some add-on aircraft do not accept a frequency or an autopilot value from outside. Then set that value by hand. The button is gray when the aircraft has no saved state. On a High Fidelity aircraft, Sync State asks what to load: the full 1:1 state, or the universal values and the fuel only.

How to load your aircraft

The load button puts your simulator into the lease: the correct aircraft, at the parking position where the last pilot stopped it, with its saved state. A dialog confirms the simulator, the registration, the type, the livery and the stand before anything starts. After the aircraft is at its stand, the plugin writes the state two times, a few seconds apart, and reports the result. The button operates differently on each simulator, see below. The lease page on the web also has a Launch aircraft link. It opens the plugin and does the same.

Microsoft Flight Simulator

MSFS 2020 · MSFS 2024 · Store · Steam

  • The plugin uses SimConnect. You do not install anything in the simulator, and you do not change a configuration file.
  • Choose the aircraft in the simulator, and start a flight. MSFS does not permit an application to start a flight, or to change the aircraft or the livery of a flight. Start the flight in the leased aircraft, in its livery, at any airport. The Load Plane button appears when the flight is up. Click it, and the plugin moves your aircraft to the stand of the lease and loads the saved state. On a High Fidelity aircraft the button is Load 1:1 Aircraft, and it loads the whole aircraft: each switch, the wear, the fuel and the failures.
  • The plugin finds your installed aircraft in the Official and Community folders, to match the lease to a livery. The first time that two liveries match, the plugin asks you to choose. It remembers your choice.
  • Sync State on MSFS has a Reposition option: tick it to move the aircraft to its stand together with the state.
  • The Universal state goes into the aircraft with the standard simulator events, for example the radio and transponder events. These operate on the standard aircraft and on most add-on aircraft. A deeply simulated add-on can refuse a value. Then the log says so.
  • High Fidelity state is for MSFS 2020 and MSFS 2024. See High Fidelity aircraft.

X-Plane

X-Plane 11 · X-Plane 12

  • Flight data comes from the X-Plane UDP output on port 49000. This is the default. You do not change the Data Output settings. For flight tracking you install nothing in X-Plane. For parked aircraft, the plugin installs its own small plugin into X-Plane for you, and asks you to restart X-Plane one time.
  • Load Sim & Aircraft starts X-Plane, chooses the aircraft and the livery, and puts you at the stand, directly from the main menu. Nothing to do in the simulator. It needs X-Plane 12.4 or newer, with the X-Plane web server on (port 8086, the default). The button is there before the flight is up. When the flight is up, Sync State takes its place. X-Plane answers only when the flight is fully loaded. From a cold start this takes some minutes. Wait, and do not click two times.
  • The first load for a registration asks you for the aircraft (when you have more than one variant of the type) and for the livery. The plugin remembers the pair for that registration. Change it on the settings page, under X-Plane aircraft for this lease.
  • The plugin finds your installed aircraft in your Aircraft folder, and the liveries in each liveries folder. It finds the stands in your own apt.dat files, custom scenery first. Therefore an add-on airport gives the correct stand.
  • X-Plane 11 has no web server. Load the flight yourself, then use Sync State. Flight tracking is the same on X-Plane 11 and X-Plane 12.
  • The Universal state goes into the aircraft with datarefs. Some study-level aircraft do not accept a dataref from outside. Then the log says that the value did not take, and you set it by hand.
  • High Fidelity state is not available on X-Plane yet.

If the internet connection fails

Keep flying. The plugin shows OFFLINE · REC in amber, and it records your flight on your computer. When the connection returns, the plugin sends the recording, oldest first, before the live data. Tailstrike fills the gap in your track. If Tailstrike terminated the flight because of the disconnection, the recording brings the flight and the lease back. The plugin also sends a recording when it starts, so you can restart the plugin, or your computer, in the middle of an outage. A red fault, instead of the amber state, means a problem with your token. Then connect the account again.

How to stay connected

  • Start the plugin before you load the aircraft, and keep it in operation for the full flight, until you stop at your destination.
  • A short disconnection from the simulator is permitted. A disconnection of approximately thirty minutes terminates the flight.
  • Always fly in real time. Do not use time acceleration.

If something does not operate

  • Open the settings page, click Copy log, and paste the log into a message on Discord. The log is also in %AppData%\Tailstrike\plugin.log.
  • Open inspector on the settings page shows each value that the plugin reads and writes, live.
  • The plugin does not need Tailstrike to connect to the simulator. If the simulator connects but the flight does not appear, check the token first.

SimConnect also connects the plugin to P3D and FSX. The load buttons and High Fidelity state are for MSFS and X-Plane only. See Connecting your sim.

On this page